• From Steve Prilliman on All About Gouges

    Do you recommend any particular brand of chisels? Pfeil doesn't seem to have all the sizes you mentioned (such as the # 3, 3mm. Do you sell tools?

    Thanks,
    Steve

    Go to comment
    2012/09/04 at 7:28 pm
    • From Bonnie Luidl on All About Gouges

      I am just starting to learn carving, I belong to a carving club and am having a ball. I also started with a flexcut set of tools. I desperately need to learn how to sharpen them, cotton wood bark really dulls the tools because of the sand etc. In it. I also have used oak, very hard, password and, my favorite, so far, butternut. I really am glad I found your website, and plan to continue with your lessons.

      Go to comment
      2016/10/13 at 10:15 am
    • From Steve Prilliman on All About Gouges

      Ok, I'm a bit dense. Pfeil does make a # 3, 3mm straight gouge. I was looking at fishtail gouges. A 3mm fishtail would seem to be hard to do since it is so small. So far, I haven't found a # 8, 10mm Pfeil fishtail.

      Steve

      Go to comment
      2012/09/04 at 9:06 pm
      • From Mary May on All About Gouges

        Steve,
        Fishtails are available in most brands starting from 5 or 6mm width. Also, #8 is usually the highest curvature (the higher the number the more curved). If Pfeil doesn't have a #8 fishtail, that's not that big of deal. Quite often the benefits of fishtails are in the #3 through #5 where they can really help in being able to get into tight areas with the sharp corners. Once they get a larger curve, that benefit of fishtails gets less. The larger the curvature, the less different between the straight and fishtail gouges.

        I sell the Stubai tools (www.stubaiusa.com) which are Austrian tools. They are good quality and a good price. I haven't really set up my site yet to advertise this yet. Let me know if you have any more questions or if you want to talk about purchasing the Stubai tools.

        Thanks!
        Mary

        Go to comment
        2012/09/05 at 8:05 am
  • From Steve Prilliman on All About Gouges - Beginner Lesson #3

    Do you recommend any particular brand of chisels? Pfeil doesn't seem to have all the sizes you mentioned (such as the # 3, 3mm. Do you sell tools?

    Thanks,
    Steve

    Go to comment
    2012/09/04 at 7:28 pm
    • From Bonnie Luidl on All About Gouges - Beginner Lesson #3

      I am just starting to learn carving, I belong to a carving club and am having a ball. I also started with a flexcut set of tools. I desperately need to learn how to sharpen them, cotton wood bark really dulls the tools because of the sand etc. In it. I also have used oak, very hard, password and, my favorite, so far, butternut. I really am glad I found your website, and plan to continue with your lessons.

      Go to comment
      2016/10/13 at 10:15 am
    • From Steve Prilliman on All About Gouges - Beginner Lesson #3

      Ok, I'm a bit dense. Pfeil does make a # 3, 3mm straight gouge. I was looking at fishtail gouges. A 3mm fishtail would seem to be hard to do since it is so small. So far, I haven't found a # 8, 10mm Pfeil fishtail.

      Steve

      Go to comment
      2012/09/04 at 9:06 pm
      • From Mary May on All About Gouges - Beginner Lesson #3

        Steve,
        Fishtails are available in most brands starting from 5 or 6mm width. Also, #8 is usually the highest curvature (the higher the number the more curved). If Pfeil doesn't have a #8 fishtail, that's not that big of deal. Quite often the benefits of fishtails are in the #3 through #5 where they can really help in being able to get into tight areas with the sharp corners. Once they get a larger curve, that benefit of fishtails gets less. The larger the curvature, the less different between the straight and fishtail gouges.

        I sell the Stubai tools (www.stubaiusa.com) which are Austrian tools. They are good quality and a good price. I haven't really set up my site yet to advertise this yet. Let me know if you have any more questions or if you want to talk about purchasing the Stubai tools.

        Thanks!
        Mary

        Go to comment
        2012/09/05 at 8:05 am
  • From Charles Oelsner on What videos would you like to see?

    I would like to be able to carve a drapery swag.
    I tried to carve a draped cross (sometimes called a "Shrouded Cross") as a simple beginner's project, but after two tries the drapery is all wrong. Your "Drapery Style Linenfold Carving" video was helpful for hanging ends of drapery, but a swag is my downfall. Folds can shrink, sometimes to a mere split or nothing at all, or tuck under another fold. Help.
    Thanks again for all the help your online videos have been.
    Charles

    Go to comment
    2012/08/31 at 4:18 pm
    • From Mary May on What videos would you like to see?

      Charles, A beautiful example of something similar to what you are wanting to carve. Look at the areas where the drapery is sharp, where it is soft. Absolutely beautiful example of drapery with a linenfold end! Hope the link works. Let me know if it doesn't. Rheims Cathedral.

      Rheims Cathedral -linen fold panel
      Go to comment
      2012/09/13 at 11:42 pm
  • From Mary May on Carving Egg & Dart Molding in Poplar

    Got it. I'll get that included as soon as I can. I actually have some left-over molding that I can simply trace exactly.

    Go to comment
    2012/08/30 at 10:07 pm
  • From Mary May on Carving Reeds on a Table Leg

    Shannon,
    I actually have one, but it is all videoed at about bench height - you would not want to see what is stacked around the shop below bench level. But, yes... I will get one on the site eventually.

    Go to comment
    2012/08/30 at 10:05 pm