Oh, yeah, quick question - what is it about that last V chisel you used that is so special, aside from its extreme sharpness? Is it a different angle, is the bottom 'mini-gouge' part more of a sharp V, or are the 'wings' swept a bit forward or backward? Would love to know more.
Well, I guess there is no doubt that it is sharp enough - simply because I use it very rarely (only for those special little cuts). The angle is no different, however, it has a slightly sharper point - not as rounded as some. But the main reason is that when I cut tiny little cuts across the grain, I just want to be sure the wood won't break apart. If I use the v-chisel that I had used to carve the rest of the shell, I would just need to make sure it is re-sharpened before I attempt these cuts. Laziness, maybe?
Wow. Just wow. I watched all the chapters in one sitting, and you are very impressive! Your stamina, and then your patience, really shine through, showing your experience, of course. It will be a while, I think, before I attempt such a thing, but I feel I have learned a lot watching you go through this process. Not least of which is the fact that I need more tools! As you say, though, you can never have enough! Beautiful work, Mary. Next time you look in the mirror, remind yourself that you should be damned proud of yourself, both for your accomplishments, and for the idea that you can teach so well. Thank you.
Hi Mary. I decided to use mahogany for this project. I'm at the point of rounding over the convex areas. A have a #1 double bevel. Will that work or should I purchase a single bevel for this job? I wanted your opinion before I dig in. Thank you, I'm really learning a lot from you.
Steve
Steve,
A double bevel will work fine also. The main reason I use a single bevel is so I am able to use it as if it were 2 different chisels. Sometimes I use it where it is lifted higher than other times (carving with the bevel side down allows me to lift it higher off the wood, where using the flat side holds it tighter to the wood).
Finally a donut you lose calories with! I have done this exercise 5 or 6 times now and use it much like a warmup to get my brain thinking on the micro level and reading the grain properly. Good stuff Mary!
After 20+ years of carving, I still think about that donut! My teacher started me out with this, and it is still haunting me! Thought I'd haunt others with it...
I would like to see a cartouche carved. One like the ones found on the philadelphia highboys. Several decorative examples would be great. Also a figurehead or female figurehead upper body that is often seen on highboys. Perhaps a reeded bedpost with a trellis of ivory carved around the post woud be a great project....... Regards...Joe Lambert
I do plan on making a video on carving a cartouche. I have carved 2 before, but would like to find a really nice style. My problem is that I need to get a view from the side of one of the originals. I know that it tips forward slightly, but want to be accurate as to how much.
From David Taylor on Carving the Convex Newport Shell - Episode 1
Go to comment2012/12/03 at 11:30 pm
From Mary May on Carving the Convex Newport Shell - Episode 1
Go to comment2012/12/04 at 10:05 pm
From David Taylor on Carving the Convex Newport Shell - Episode 1
Go to comment2012/12/03 at 11:26 pm
From Mary May on Carving the Convex Newport Shell - Episode 1
Go to comment2012/12/04 at 10:01 pm
From Steve Cofield on Carving the Convex Newport Shell - Episode 1
Go to comment2012/11/29 at 1:11 pm
From Mary May on Carving the Convex Newport Shell - Episode 1
Go to comment2012/11/29 at 1:19 pm
From Shannon Rogers on Carving a Donut - Beginner Lesson #6
Go to comment2012/11/27 at 2:58 pm
From Mary May on Carving a Donut - Beginner Lesson #6
Go to comment2012/12/04 at 10:23 pm
From JOE LAMBERT on What videos would you like to see?
Go to comment2012/11/26 at 10:53 pm
From Mary May on What videos would you like to see?
Go to comment2012/12/04 at 10:25 pm